Post Buying Request
2016-05-06 05:47:35|www.iabrasive.com

Xining to Eliminate Backward Capacity-210000 Tons

The backward production capacity that has been listed in elimination catalogue will be shut down. This year, Xining will plan to eliminate backward production capacity of 210000 tons, including silicon carbide, chemical industry, carbon, etc.

2016-05-05 05:39:34|www.iabrasive.com

Restoring and Increasing Production Makes Upward Alumina Prices Blocked

It is understood that due to the rise in alumina prices, most of enterprises that planned to reduce the production have stopped to reduce the production, and some have planned or are planning to restore the production.

2016-05-04 05:44:28|www.iabrasive.com

Introduction on Grinding Characteristics of Imported Sanding Paper in Sheets

We will give an introduction on grinding characteristics of imported sanding paper in sheets from the following aspects in this article.

2016-05-03 05:48:23|www.iabrasive.com

Guangxi May Become the Domestic Low Cost Alumina Base

According to the data, the design capacity of alumina in Guangxi is 8.4 million tons, whose currently operating capacity is running close to 7.4 million tons. Most companies are in a high efficiency in production.

2016-04-27 08:55:14|www.indmin.com

Australian Bauxite: Aluminum and beyond

Australia is the world's largest producer of bauxite, with the majority used to produce alumina for the aluminum industry. In 2015, Australia produced about 50,000 tonnes fused alumina.

2016-04-27 03:54:20|www.iabrasive.com

Introduction and Product Application of Imported Abrasive Paper (MIPOX)

Imported abrasive paper (MIPOX) adopts fine electrostatic sand-planting technology and special sand-planting standards, which make products with long service life and faster heat dissipation, and not easy jammed.

2016-04-26 03:50:43|www.iabrasive.com

Environmental Protection and Sustainable Development of Abrasives Industry

Strict environmental protection policy highlights the government determination to promote the adjustment of industrial structure upgrade. And abrasives industry that has been taken for energy intensive and highly polluting industry...

2016-04-26 02:28:44|www.youroilandgasnews.com

Surface Preparation Abrasives for Oil and Gas Sector

Surface preparation is one of the key techniques applied to protect offshore equipment by applying a film-forming material.

2016-04-25 06:09:32|www.iabrasive.com

Features and Advantages of VSM Bulk Abrasive Sanding Belt

This shows that VSM abrasive sanding belt can ensure more stable grinding surface effect and better consistency. Learn more great quality sanding belts, please visit the following companies

2016-04-21 06:41:27|arstechnica.com

Making Transistors with Dissolved Nanocrystals

Semiconductors are integral to modern electronics. Recently, scientists have demonstrated the ability to design and fabricate flexible, high-performance semiconductors out of colloidal nanocrystals.

2016-04-21 05:39:14|www.newelectronics.co.uk

Gallium Oxide Could Replace Silicon

According to research by Japanese startup, Flosfia, gallium oxide could replace silicon as the best material for use in electronic components such as diodes and transistors as it is cheaper, more efficient and capable of handling high voltages.

2016-04-20 05:16:29|www.iabrasive.com

Australian Alumina to Greet Stable Aluminum Prices After Price Boom

In the second half of March, the FOB price of Australia alumina has already risen from the early 197 dollars/ton to $249 / ton. As the rebound of Chinese alumina prices comes to an end, Australia's alumina has also been in the quiet period.

2016-04-19 05:46:35|www.iabrasive.com

High Purity Alumina Market to Reach $5.09 Billion in 2020

According to the latest market research report, high purity alumina market will reach $5.09 billion in 2020, and the compound annual growth rate is 20.1% from 2015 to 2020.

2016-04-18 05:29:29|www.iabrasive.com

Market Analysis of Silicon Carbide in March 2016

It is reported that the silicon carbide market remains weak in Ningxia. Many enterprises that had planned to return to work in March did not put into production as planned, and chose to wait and see.

2016-04-15 02:54:40|www.iabrasive.com

Influence of Grinding Wheel on Surface Roughness of Workpieces

This article will discuss the influence of grinding wheel on surface roughness of workpieces from the following four aspects.

2016-04-13 05:46:47|www.iabrasive.com

Major Methods to Produce High Density Silicon Carbide Ceramics

Currently, pressureless sintering, hot-pressing, and reactive sintering have become major methods to produce high density silicon carbide ceramics.

2016-04-13 02:44:58|news.thomasnet.com

Vertical-Sheet Pass-Through Abrasive Blasting

Abrasive Blast Systems recently designed & fabricated a custom blast solution which allows the customer to automatically blast many different sizes of composite sheets in a vertical orientation.

2016-04-11 05:09:13|www.iabrasive.com

Market Prices of Alumina Have Been Holding Steady in Recent Period

In Henan, there are many great alumina suppliers, such as YiChuan County ShengYu Fireproof Material Co., Ltd., CIPIE(Henan)Import and Export Trade Co.,LTD. and Yichuan Dongfeng Abrasives Co.,Ltd. You can click the above links to make contacts with them.

2016-04-08 05:55:52|www.electronicsweekly.com

UK Researchers Make High Temperature Op Amp in SiC

Raytheon UK has collaborated with Newcastle University to produce silicon carbide (SiC) based amplifier circuitry with operational amplifier like characteristics.

2016-04-07 06:00:32|www.iabrasive.com

Ceramic Abrasive Sanding Belts Wiredrawing Materials Last Longer

Why ceramic abrasive sanding belt wiredrawing materials last longer? Let’s come and see the following introduction.PS: Good News! Our WeChat public platform is available! Enter iabrasives inside WeChat public platform, interacting with us at any time!

Home Previous Page 17 18 19 20 21 22 23 Last Page 20/59 Total 1171 Records

Top News

Sponsored links